Reptile Style 800 Size 6s Quad

photo73360081981384774

Recently I got myself a TBS clone quad frame kit from a friend so decided to try a 6s quad, I have a new Pixhawk from goodluckbuy at my disposal so might as well test it out

Specs!

– Frame TBS style with RCtimer S800 Arm
– Rctimer 5010/14 360KV Multicopter Brushless Motor (5.0mm Shaft)
– 14×5.5 Carbon Props
– 45A multistar ESC opto
– Pixhawk with neo7h
– 2200mAh 6s, it 2200mAh 3s in series will try 3000 later
– Rangelink LRS with FRSky Taranis
– 3D Printed Gimbal for SJ4000

S800 arm from rctimer are suck, if you plan to use it make some mod on it, I removed the brass stub that hold the screw and take a 3.5mm drill bit make a hole from top to the bottom (will post picture later), and take a M3 40mm screw to fasten the arm

Initial flight was fine but had a crash when trying autotune for first time, most probably my mid throttle are to high (500), the Quad only need around 30% to hover at 8A!

Turn out the issues with the motor and esc combination motor getting out of sync so I ordered myself 5x these

Sunrise BLHELI Multi Series 20A 2-6S
www.himodel.com/electric/Sunrise_BLHELI_Multi_Series_20A_2-6S_Speed_Controller_for_Multicopter_BLHELI-Multi-20A-OPTO_Tube_installation.html

thanks to rcgroups for suggesting the esc to me

www.rcgroups.com/forums/showpost.php?p=29633244&postcount=296

It almost crashed the second time but my good reflex save the quad from kissing the ground again

I get total 7min with 2200mAh 6s on this test will try 3300mAh next time and maybe 5000mAh 6s

Hopefully I can get the ESC before weekend so I can test it again with the new ESC

Autotune crash and almost crash video

FX-61 Hobbyking Phantom FPV

Last year bought this plane for my fpv’ng but due to it large size it hard to bring this beast around, plane will be given away for free to anyone in malaysia if you are willing to pickup it up from me :)

Hobbyking does not seem to re-stock the plane anymore most probably it has been replaced by FX-71 buffalo or Go Discovery wing

My current setup of the wing are

– NTM 3536 1400KV 600Watt motor with 60A ESC

– 10×6 aeronaut carbon cam

– 4200mAh for short range and 10,000mAh battery 3S

– MG929 hobbyking 12g servo

– PV0420 640tvl with 200mw bevrc 1.3ghz video transmitter

– BEVRC RX with 5 turn Helical (10km record so far with 200mw)

– Dominator Goggle

– Storm OSD with RTH

Kits will include NOTHING only bare kits no servo or anything

some picture of it current condition

PhotoGrid_1392971964140

not pretty but still flyable :D, here was previously assemble with OSD

20130609_170041 20130622_091642 20130622_133542

last video FPV around Puncak jalil with inverted landing at the end :D

Ov3rquad: FPV Quadcopter

This my Ov3rquad FPV frame from MyRCBUILD.COM, this is a open frame the plan for it are available at: http://forums.openpilot.org/topic/13079-ov3rquad-open-source-diy-fpv-frame-for-all/ I don’t have a CNC machine so I opted to buy it from myrcbuild.

my Current configuration for the frame are:

– SunnySky 2212-13 980kv

– Hobbyking F30A (flashed with simonK)

10×5 Graupner GemFan E-Props

naze32 Acro Flight Controller

– Tymax 3000mAh 4s battery

 

FPV equipment

– BEVRC 1.3 RX & RX (200mw) combo

– Homemade Cloverleaf antenna for VTX & Crosshair antenna for VRX

– PZ0420 CCD Camera for Live feed

– GoPro 2 for HD recording

– FatShark Dominator Video Googles